In the field of chain lubricants, ADDINOL has specialised in high-temperature applications. On the basis of synthetic components with special additives, ADDINOL chain lubricants are suitable for conveyor chains, rollers or drive belts with a high thermal load, as can be found in pass-through furnaces, dries, film spreading systems or press lines. Even at high loads and speeds, ADDINOL high-temperature chain oils effectively prevent crusting and deposits.
The high-temperature chain oils from the ADDINOL Cliptec XHS series are used at operating temperatures up to maximum +250 °C, primarily in the plastics' industry. Despite the high process temperatures, ADDINOL Cliptec XHS chain oils form no varnishing or crusting on the chain slideways and their runways. The lubrication oil infeeds remain free. Even at high speeds, the chain oils adhere securely to the slide areas of the chain and guarantee a constantly stable lubricating film. Benefit from the efficiency and low consumption by using ADDINOL chain lubricants.
TChains, conveyor belts and rollers subject to high thermal loads are often symptomatic of the conditions in fibreboard manufacture.The ADDINOL Belt Lube HT series was developed specially for the dusty, aggressive and moist environment in continually working press lines from Dieffenbacher (CPS ContiPanelSystem) and Siempelkamp (ContiRoll®Pressen) as well as in non-continuous Küsters presses. Besides active protection against wear and deposits, these chain oils stand out particularly through their excellent friction co-efficient. The reduced friction resistance causes a reduction of the mechanical and thermal load on the components used. ADDINOL Belt Lube HT products can therefore increase the lifetime of the entire system and reduce energy consumption.